Multistar NX

Set out from economy, attract an user to choose Mikelang brand-new 3 of system of machine tool of type of Multistar NX-24 circumgyrate the mainest factors are: Outstanding stand-alone is produced can, 100% flexible with highest precision. This is idiosyncratic make this system outstanding in congener product. The working station amount of this system, make its produce efficiency to be able to be rivalled with photograph of completely mechanical system almost. All treatment main shaft all but process designing, this saved the machine down time when changing a line greatly. Of machine tool of complete CNC of new-style Multistar NX-24 flexible rise greatly, and crop appreciably is reduced. Accordingly, it agrees with especially need is many (from hundreds of go to thousands of) treatment is different type work, and the circumstance that accuracy asks to be μ class. This equipment will await the accurate machine such as control system to machine an industry to exhibit skill greatly compatibly in equipment of car, watch, medical treatment. This equipment is all main shaft all but process designing, the operation interface that controls unit clarity simplified fast process designing and the course that change a product quickly. Multistar NX-24 provided 24 working station, can have 44 treatment unit at most, 60 axes. All axes are machined at the same time, the high yield that assured a system goes out. Because all axes are process designing of CNC numerical control, of different workpiece change a line to basically be finished through software process designing. Compare with the machine tool photograph of mechanical drive, numerical control means saves time greatly. Every working station all can undertake machining at the same time from two direction: Coping and a side or coping and bottom, bottom reach a side. Workpiece is OK also from square sectional turn over a face to become a circle sectional clip is held. The crop of Multistar NX-24 system is almost OK rival with the photograph of system of circumgyrate type machine tool of mechanical drive. All axes all are process designing of CNC numerical control, because this reduced the time that line place changes to need between different workpiece greatly, make cost is reduced significantly. CNC Milling